Service Manual, 2016-12
24 / 42
Sensor in refrigerating chamber
1） To remove the sensor cover, you may
squeeze it up and down;Take the sensor
out from card slot.
Sensor in Variable temperature chamber
Ambient temperature sensor
8.7Compressor case
Rear cover and compressor case
Rear cover and compressor case
1)Remove by cross screwdriver the screws fixing
back cover plate of compressor chamber
anticlockwise
2)Take the back cover plate of compressor
chamber upward.
Terminal box of the compressor
1） Remove the screwsTwo screws
outsideOne screw inside
Remove the clipping stripSlowly pull it out
To Next Page
Loading...
