Midea UR-LC46GE-DR - Page 25

Service Manual, 2016-12
25 / 42
1. Remove the protective cover
1）Pry the protective cover slowly from the
upper part,
2）Pull it out and remove it.
2. Remove the starter
and protector
Unplug the starter and protector (you can use a
screwdriver to pry it slowly)
1. The reverse process can complete
installation.
/
Piping system in the compressor case↓
1 Condenser-1(in)DrierCapillary
Tube.Transition pipe
2 Main control board box
3 CapacitorCompressor coverCompressordrain tr
4 Condenser-2(out)
5 Suction conection Pipe
Condenser fan motor
Fan motor
None
Standby condenser
None
 8.8Temperaturecontrol panel