4.7 Arpeggiator(ARP):
Arpeggiator switch，When press the button to open the arpeggios, LED lighting, press the button,
once again and arpeggio function will be closed, the LED put out, after the arpeggiator is ON, can
be used together with the keyboard。Arpeggio function: If the current press the keyboard of C2,
will send C2, C3, C2,C3......;If the current press D3 keys, will send D3, D4, D3, D4......
4.8 Velocity(VEL):
When the “ARP” is OFF, press the “VEL”, LED lights, will shut down the keyboards velocity sense,
the keyboard only sends the strength of the biggest (127). When the “ARP” is ON, press the
“VEL”, will lock the keys of the current arpeggio effect, until there is a new keys pressed to
change。
4.9 CHORD:
press the “CHORD” , Chord is ON, LED lights. Press the button again, close the chord function,
LED put out. In chord mode, through "the OCTAVE" and "OCTAVE >" button to change different
chords, chord types including "Major", "Minor", "Minor 6", "Minor 7", "Augmented", "Major 6",
"Major 7" , "Suspended ", "Diminished" .
4.10 RESET:
When the ““OCTAVE DOWN” or “OCTAVE DOWN” or “TAP” or “ARP” or “VEL” or ”CHORD” is
ON，”RESET” button LED lights，If you press “RESET” button again when the LED light, the
button will be reset to the default state, shut lights.
4.11 SET:
Composite keyboard mode switch, When press “SET” button, not loosen，LED lights, the
composite keyboard mode is ON, then press any keyboards and will make can reuse functions.
For example : “SET” is ON, press the keys of the first (Transpose +), can Transpose +1.
Loosen the “SET” button will exit composite keyboard mode.
4.12 Walk with control buttons (PLAY,STOP,RECORD):
PLAY, STOP, RECORD button for MIDI software Play, Stop, record of the function, you can use
the edit button MIDI information MIDI Editor software.
4.13 Transpose+/-:
It is possible to transpose up or down by as much as 12 MIDI notes.
4.14 REVERB ON/OFF:
It is open and closed reverberation function.
4.15 VELOCITY Curve (NORM/HEAVY/SOFT):
Choose velocity curve (standard/heavy/light), the user can choose according to personal feel the
velocity of the corresponding curve.
4.16 ARP MODE：
When the “ARP” is ON , LED lights.
UP: Up mode, the arpeggiator will play the notes in increasing chromatic order. If a Cmaj chord is
played, the pattern would be: C, E, G, C, E, G, …..
DOWN: Down mode, the arpeggiator will play the notes in decreasing chromatic order. If a Cmaj
chord is played, the pattern would be: G, E, C, G, E, C, …..
RANDOM:RANDOM mode, arpeggiator playing notes random broadcast, not according to the
notes in order to play, random play the notes.
To Next Page
Loading...
Need help?
General
