midiplus PianoEngine - Rotating Wheel

MIDIPLUS Co, Ltd.
7
Press [Shift] button, light up, release it and light off, select reverb/ chorus/
continuous/ translation/ modulation, and the display will show the current
control.
3.11 Rotating the wheel:
 Adjust parameters.
 Press the spinning wheel, the drum will play or stop. In the drum mode,
the display shows the playing status.
Note: When you want to restore the preset combination to the factory settings, just
press and hold the [Set] button before powering on the PianoEngine, and then turn
it on again.