2.10.4 Numeric Keypads
These numeric keypads can be used to enter the value of a selected controller in Edit mode. Press
enter key to confirm, and press cancel key to delete the number.
3. Edit Mode
Press the MIDI/SELECT button (backlight will turn white). The screen will display "EDIT" in the upper left
corner, indicating that X pro mini has entered
Edit Mode
. Here you can customize the X pro mini as
you like.
Note: In Edit mode, the keys with labeled functions will be used as shortcuts to access the
parameters, without sending any MIDI note message.
3.1 Changing the MIDI Channel
To change the MIDI channel, simply press the MIDI/SELECT button, and press the corresponding note
on the keyboard below the MIDI channels you wish to select.
For example, to change X pro mini’s MIDI output to channel 12, press the MIDI/SELECT button and
press the key labeled with
12
below the MIDI channels.
Note: Channel 10 is the built-in percussion sounds channel. When using the built-in tones, if the MIDI
channel is set to ch 10, the sound switching function and button will not work. You can only play the
percussion sounds.
10