3.7 Assigning MIDI Channels
The channel of the controllers can be set between 0 and 16. The default global is channel 0. To
change the channel of the controllers, please follow the steps below:
1. Press MIDI/SELECT to enter Edit mode
2. Press “CTRL CHL.” key
3. Press or turn the controller you want to customize
4. Enter a value using the numeric keypad (value range between 0 to 16)
5. Press Enter key
6. Press MIDI/SELECT button to exit Edit mode
For example, to set the control channel of knob “T2” to channel 9, follow the steps below:
1. Press MIDI/SELECT to enter Edit mode
2. Press “CTRL CHL.” key
3. Turn the knob “T2”
4. Enter a value “9” using the numeric keypad
5. Press Enter key
6. Press MIDI/SELECT button to exit Edit mode
3.8 Switching the Built in Tone
The X pro mini has 128 built-in tones. You can quickly switch between 6 tones using the B1 ~ B6
buttons, switch the previous or next tones by using the B7 and B8 buttons, or you can select the
tones directly by following these steps:
1. Press MIDI/SELECT to enter Edit mode
2. Enter a value using the numeric keypad (value range between 0 to 127)
3. Press Enter key
4. Press MIDI/SELECT button to exit Edit mode
For example: to switch the current tone to "String Ensemble 1", according to 5.2 Instrument Patch
Map, the program change number of "String Ensemble 1" is “48”, please follow the steps below:
1. Press MIDI/SELECT to enter Edit mode
2. Enter value “48” using the numeric keypad
3. Press Enter key
4. Press MIDI/SELECT button to exit Edit mode
Note: The built-in percussion sounds cannot be switched by this method. You can change the
MIDI channel to channel 10, which is the percussion sounds channel. For detailed operation,
please refer to 3.1 Changing The MIDI Channel.
15
To Next Page
Loading...
Need help?
General
