http://www.midiplus.com.tw
(6) xPAD MIDI Editor Software
xPAD connect computer, and then open the xPAD MIDI Editor software, pay attention to the computer
have to recognize xPAD USB devices, xPAD MIDI Editor software can display the connection status and
the firmware version number, such as picture 1. Computers have no recognize xPAD device or No insert
xPAD equipment, open xPAD MIDI Editor software will display not connected state: Disconnect, such
as picture 2, please check.
Picture 1: Drive connect (display Connect, firmware version number: FW: V0.02)
Picture 2: Drive not connected (display: Disconnect)
To Next Page
Loading...
