http://www.midiplus.com.tw
MIDI Editor software functional description
Function of the serial number
Function of the serial number
(1)Filename
(2)New construction parameters(NEW)
(3)Open the construction file(OPEN)
(4)Reset parameters and synchronize
data(RESET)
(5)Export construction file(EXPORT)
(6)Save the parameters(SAVE)
(7)Sync to computer(SYNC TO PC)
(8)Sync to the device(SYNC TO FW)
(9)The composite function area
(10) Encoder (K1,K2)
(11) Pusher potentiometer(S1,S2)
(12)Select Drum Pad mode
(13) Toggles the PAD group of the
1/2/3
(14) Drum PAD
(15) Function of the alias
(16) Modify the alias
(17) Data byte(VALUE)
(18) Edit channel(CHANNEL)
(19)Data type(TYPE)
(20) Real-time status information
6.1 Filename
Users in the area of autonomous operation function.
6.2 New construction parameters (NEW)
Click "NEW", at the option to restore for the default parameters.
6.3 Open the construction file (OPEN)
Click "OPEN", can open the saved construction file, the file named “***. CUS”
6.4 Reset parameters and synchronize data to the device (RESET)
If xPAD connected, click the "RESET", the software configuration parameters restore to the factory, and
synchronous data to the xPAD ;
To Next Page
Loading...
Need help?
General
