Midland ALAN 42 MULTI User Manual

ENGLISH
1
INDEX
INTRODUCTION ...................................................................................1
FUNCTION AND LOCATION OF THE CONTROLS .............................2
HOW TO OPERATE WITH YOUR ALAN 42 MULTI ..............................5
FREQUENCY BAND SELECTION .....................................................5
FREQUENCY BAND CHART ............................................................. 6
TECHNICAL SPECIFICATIONS ............................................................7
INTRODUCTION
ALAN 42 MULTI is a small-size portable transceiver which guarantees
the best performance during the years even under heavy conditions.
What is unique to this innovative transceiver is the capability to select
any of the European CB bands with an easy and fast procedure.
ALAN 42 MULTI has a built-in Channel Phase Loop synthesizer (PLL)
circuit and an automatic battery economy circuit.
The wide display can be illuminated and allows the night use. Optional
microphones can be connected to the equipment thanks to the external
mike plug situated on the upper side of the radio.
The unit is preset at the factory on the “EC“band , CEPT 40CH FM
4W.

Midland ALAN 42 MULTI Specifications

Power

power supply	7.2 ÷ 13, 2 nom 12V
current drain at standby	100 mA when the save mode is off, 45 mA when the save mode is on
current drain	900 mA

Receiver Specifications

sensitivity at 10dB S/N	0.5µV (AM), 0.25µV (FM)
selectivity	more than 60dB
audio output power	0.5W 8 ohm (10% distortion)

Transmitter Specifications

RF output power	duty cycle 10% 4W AM/FM
frequency tolerance	0.005%
harmonic suppression	more than 70 dB

Weight and Dimensions

dimensions	30x70x140 mm
weight	220 gr