FUNCTION AND LOCATION OF THE CONTROLS
1. Channel selector
2. Multifunction backlighted display. It shows:
A. Channel selected number
B. The received signal strength and the power of the transmitting signal
C. AM/FM mode
D. RX/TX:TX=transmit mode; RX=receive mode
E. SCAN mode
F. EMG mode
G.Frequency band selected.
H.LOW: displayed when the radio transmits in low power (this mode is possible with
some frequency bands only – see the Frequency band chart).
I. LOCK: microphone (UP/DOWN buttons) lock enabled.
3. ”EMG” button: Emergency channel. By pressing it, you will be automatically positio-
ned on CH 9 (emergency channel). The display will show “EMG”. It will not be possi-
bile to change accidentally the channel.
4. 5.“Q.UP/Q.DOWN” buttons: To skip 10 channels UP (Q. UP) or 10 channels DOWN
(Q.DOWN).
2
To Next Page
Loading...
