midlandusa.com
2
||
INSTALLING THE PROGRAMMING SOFTWARE
NOTE: The following is using Microsoft Edge and the Winzip application to unzip the programming software. Illustrations
may vary with other browsers or applications but the steps will be very similar. The most important step is to save the
programming software to your desktop, or create a shortcut on your desktop so that you can return to it easily.
1. Download the FREE BR200 Programming Software
and save it to a designated folder or on your desktop.
2. Open the zip file and extract the programming software.
a. When asked, click “Save”. It will then download
the programming software as a .zip file
to your downloads folder.
b. Click on “View Downloads”” or go to your
downloads folder under documents
(recommended).
To Next Page
Loading...
