Midland BT1 User Manual

6
1. MIDLAND BT1, “Driver only”
› Bluetooth connection for mobile phone or GPS (in
case of mobile phone with MP3 feature, you can li-
sten to music in stereo mode)
› Wired connection for iPod/MP3 player or with a tran-
sceiver for bike-to-bike communications up to a di-
stance of 5km
2. Midland BT1, “Driver and Pillion”.
› Rider to Pillion intercom feature
› Bluetooth connections for the driver:
Mobile phone or GPS and pillion’s device for Inter-
com communications (in case of mobile phone with
MP3 feature, the driver can listen to music in stereo
mode).
Bluetooth connections for the pillion: ›
none; only with the driver’s unit for Intercom commu-
nications.
Typical congurations of BT1 Switching your Midland BT1 on
and off
BT1 can be switched on by means of the central button la-
beled “Intercom”.
To switch off the unit you must use a combination of two
buttons (intercom+AUX), thus lessening the chances that you
might turn off the unit accidentally (especially whilst wearing
heavy gloves).
Switching the unit on:
› Press and hold Intercom button down for approximately 3
seconds until the BLUE indicator lights.
Switching the unit off:
› Press and hold both “Intercom” and “AUX” buttons toge-
ther for approximately 3 seconds until the RED indicator
ashes 3 times.

Midland BT1 Specifications

General

Brand	Midland
Model	BT1
Category	Intercom System
Language	English