Midland BTX2 User Manual

10 - Midland BTX2
midlandusa.com
Wired connection always in background
This feature lets you keep the wired connection always on, even when the phone
or the intercom is open. This feature can be useful when you connect a GMRS
transceiver.
By default this option is on.
Disabling:
› Enter setup mode.
› Turn o the unit.
› Press and hold down the “Middle” button about 7 seconds, until the Red light
is on permanently.
› Press the “Forward” and “Middle” buttons together for 3 seconds. The Blue LED
will ash twice.
› Double press the “Middle” button to exit setup mode and use the BTX2.
Enabling:
Follow the same procedure described above; now the Blue LED will ash once.
To exit setup mode, double click the “Middle” button.
Setup and Firmware update
It is possible to congure and update the rmware of your BTX2 using the USB
connection to your PC. On the Midland website midlandusa.com on the BTX2
page you can nd the PC software and the new rmware updates if available.
ATTENTION DO NOT CONNECT THE UNIT TO THE PC BEFORE YOU DOWNLOAD AND
INSTALL THE SOFTWARE
Use at your own risk
The use of the device will impair your ability to hear other sounds and others
around you.
Listening to music or speaking on a telephone may prevent you from hearing
others around you and distract you from riding safely. The use of such device
while riding may endanger you and others, and its use, in some areas, could be
prohibited.
Using this device at a high volume may result in permanent hearing loss.
If you experience ringing in your ear or any other hearing related pain, reduce the
volume or discontinue using this device. With continued use at high volume, your
ears may become accustomed to the sound level, which may result in permanent
damage to your hearing.
Please use this device at a safe volume level.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
You are cautioned that changes or modications not expressly approved by the
part responsible for compliance could void the user’s authority to operate the
equipment.
“This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device.”
“This equipment complies with Industry Canada radiation exposure limits set
forth for an uncontrolled environment. “
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
›› Reorient or relocate the receiving antenna.
›› Increase the separation between the equipment and receiver�
›› Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected�
›› Consult the dealer or an experienced radio/TV technician for help

Midland BTX2 Specifications

General

FM radio	-
Headset mode	Yes
Maximum range	800 m
Channels quantity	- channels
Product color	Black
Protection features	Shock resistant, Water resistant
Quantity	2

Weight and Dimensions

Weight	- g