2 | CT710 Instruction Guide CT710 Instruction Guide | 3
Sommario
Content: 4
Maintenance 4
Main functions 5
Description of the device 6
LCD display 6
Transceiver 8
Basic operations 10
Antenna 10
Turning on and off the power 10
Monitoring function 10
Transmitting 10
Select Mode 10
Dual-band mode 11
Channel Mode 11
Frequency Mode 12
Radio Function 12
The Flank Key Definition 12
DTMF Code 12
DTMF programmed by software 13
ANI PTT-ID Operation 13
Shortcuts Operation 14
Menu function 15
Menu Operation 15
Menu Function List 16
Menu Function introduction and setting 18
Emergency Alarm 18
Setting Reverse Frequency Function 18
Scanning 18
Select scan type 18
VOX Sensitivity Setting 19
Power Setting (high or low) 19
Squelch Threshold Setting 20
Scrambler Setting 20
Backlight On/Off Setting 20
Backlight Color Selection 21
Beep On/Off 21
Keypad Lock Function Setting 21
Transmitting TOT Setting 22
Voice Function (only in English) 22
OFFSET DIFFR 22
Selecting the CTCSS tones and DCS codes 22
Setting the receiver CTCSS/DCS (R-CDC) 23
Setting the transmitting CTCSS/DCS (T-CDC) 23
+/- Frequency shift direction (for through repeaters) 23
Selecting the Frequency Step 23
Wide/Narrow Band 24
Roger Beep 24
To Save/delete a channel 24
CTCSS tone table: 50 tones 26
DCS: Digital code 105 tones 27
Table of solutions 28
Technical Specification 29
To Next Page
Loading...
