14 | CT710 Instruction Guide CT710 Instruction Guide | 15
Shortcuts Operation
MENU + 0 ANI setting
MENU + 1 scan mode
MENU + 2 priority scan mode (only in VFO mode)
MENU + 3 VOX Sensitivity setting
MENU + 4 output power setting
MENU + 5 SQ adjust
MENU + 6 scrambler on/off setting
MENU + 7 backlight on/off setting
MENU + 8 backlight color setting
MENU + 9 beep on/off
MENU + # receive and transmit CTCSS/DCS setting
MENU + * S-D +/- potential difference setting
Menu function
Menu Operation
To enter the Menu functions, follow this procedure:
Press MENU to enter the menu mode.
Turn the encoder to select the menu.
Press ENTER into the menu mode to set the desired function: you can
press the number key directly, but for some functions (such as TOT, Voice,
Frequency offset) you have to rotate the encoder to find the desired op-
tion. Press ENTER to confirm the selected setting.
When you have completed all the setting, press VFO/MR to exit the Menu
mode.
To Next Page
Loading...
