Midland G10 PRO - Battery and Reset; Battery Recharge; Resetting the Radio

8 | Midland G10 PRO instruction guide
Battery recharge
G10 PRO is equipped for using a 7,4V Li-ion rechargeable battery pack which can
be recharged connecting the socket of the AC/DC wall adaptor to a mains power
socket and inserting the jack of the wall adaptor into the desktop charger plug.
It takes 4-5 hours to fully recharge the radio.
For maximum battery life, we recommend charging the battery pack when the G10
PRO is o and the battery pack is fully discharged.
! Using a dierent battery charger other than the one specified can cause damage to
your device or may even cause explosions and personal injuries.
The Power saving feature enables a reduction in consumption of batteries. If it has
been set, it automatically activates when the transceiver does not receive any signal
for more than 5 seconds in order to save the battery life. Power saving can be disa-
bled only through Programming software.
Reset
To reset the radio to its factory settings, keep pressed the Function Key 1 and 2.