Midland G18 - Menu Functions; Channel Scanning (Scan;PRI); VOX Hands-Free

13
| 12
PRI (Priority Scan)
When activating this function, the radio will alternately scan
the standard channels and the priority one. The priority
channel can be selected only with the programming
software. The default priority channel is CH1.
POW – Setting the transmission power
G18 has 2 power levels.
To select the desired level:
1. Press the MENU button;
2. Rotate the Encoder knob till the display shows “POW”;
3. Press ENT;
4. Rotate the encoder knob and select the desired power level;
5. Press ENT to confirm. If low power is selected, the display will
show “LOW”
Name
It is possible to choose and set a name that will appear on the
display instead of the channel number.
Dealer Programming software (not applicable to UHF/CB model)
Thanks to Midland Programming software PRG-G15, it is possible for a
dealer to increase the performance of your radio or to reduce its
functionality by enabling or disabling some features (CTCSS, TOT, VOX,
ROGER BEEP, SQUELCH, VOICE, etc) For further information, please consult
the Programming software manual. Any attempt to change frequencies or
output power of the radio invalidates the approval