9
• Do not attempt to open the unit. Non-expert handling of the unit may
damage it and annul the warranty.
• High temperatures can shorten the life of electronic devices and
warp or melt certain plastics.
• If it appears that the radio emits a peculiar smell or smoke, please
shut off its power immediately and remove the charger or battery
from the Radio.
• Do not transmit without an antenna.
Maintenance
Your G18 is designed to fulfill any statutory warranty obligations and
to provide many years of service.
As is true for all electronic devices, we recommend following these few
suggestions:
LED - Backlight
To enable/disable the LCD backlight:
1. Press the MENU button;
2. Turn the Encoder knob until “LED” is displayed;
3. Push ENT to enter the function;
4. Turn the Encoder knob to activate/deactivate the backlight.
There are 3 available options: “ON”, “OFF” and “AUTO”.
AUTO: the display backlight activates when any key is pressed and
lasts a few seconds.
OFF: back light off.
ON: backlight always on. Attention: in this mode the power save is
off, therefore the battery consumption will increase.
5. Confirm your selection with ENT.
To Next Page
Loading...
Need help?
General
