20 | Midland G7 Pro user’s manual
2. By pushing / you will hear the 10 pre-set melodies.
3. Confirm by pressing the PTT key or wait for 10 seconds.
Now, each time your Midland G7/G7E Pro sends out a tone call, it will
beep with the selected melody.
If the Vibracall function is activated (See par. “Vibra-call function”), the
call tone won’t be heard.
Dual Watch function
This function allows the monitoring of 2 channels of your choice.
Procedure:
1. Select one of the 2 channels you want to monitor.
2. Press 9 times the MENU button in the PMR band until the display
shows “TX oF RX”.
3. With the / button select the second channel to monitor.
4. Push the PTT key or wait for 10 seconds for confirmation.
To disable the function, press the MON/SCAN button.
Keypad beep
To deactivate the keypad beep, follow these steps:
1. Press for 8 times the MENU button in the PMR band, until “bP on”
is displayed.
2. Use the / buttons until the display shows “bP of”.
3. Confirm by pushing the PTT or wait for 10 seconds.
Now you won’t hear any beep at the pressure of any button.
To Next Page
Loading...
