Midland G7 Pro user’s manual | 21
7. Troubleshooting and radio reset
Your Midland G7/G7E Pro is designed to provide you with years of opti-
mal performance. If for some reason problems arise, refer to this chapter
before contacting a service centre in your region.
Reset
If your transceiver experiences a logical malfunction (improper symbols
on the display, blocking of functions, etc.), it may not be experiencing a
true failure, but rather a problem caused by external factors. For exam-
ple, it may have an incorrect setting brought on by a noise or spikes in
the electrical system during battery recharging. In such cases, you can
reset the transceiver to its factory-programmed settings, by resetting all
parameters:
1. Turn off the transceiver
2. Keep pressed the button and turn on the radio at the same time.
All the functions will be reset ex-factory.
Before you go ahead with the reset, we recommend that you take note of
all the setting you have carried out as they will be deleted.
To Next Page
Loading...
