22 | Midland G7 Pro user’s manual
7. Troubleshooting and radio reset
Your Midland G7/G7E Pro is designed to provide you with years of optimal
performance. If for some reason problems arise, refer to this chapter before
contacting a service centre in your region.
Reset
If your transceiver experiences a logical malfunction (improper symbols on the
display, blocking of functions, etc.), it may not be experiencing a true failure,
but rather a problem caused by external factors. For example, it may have an
incorrect setting brought on by a noise or spikes in the electrical system during
battery recharging. In such cases, you can reset the transceiver to its factory-
programmed settings, by resetting all parameters:
1. Turn o the transceiver
2. Keep pressed the button and turn on the radio at the same time. All
the functions will be reset ex-factory.
Before you go ahead with the reset, we recommend that you take note of all the
setting you have carried out as they will be deleted.
To Next Page
Loading...
Need help?
General
