Midland G9 Plus User Manual

14 | Midland G9/G9E Plus instruction guide
Keypad lock
Keep pressed CALL/
CALL
MENU
EMG
15
24
23
22
21
20
19
18
17
16
3
2
1
14
13
12
10
9
11
8
7
6
5
4
for about 5 seconds. and
CALL
MENU
EMG
15
24
23
22
21
20
19
18
17
16
3
2
1
14
13
12
10
9
11
8
7
6
5
4
will be displayed as confir-
mation. Only PTT, EMG and CALL/
CALL
MENU
EMG
15
24
23
22
21
20
19
18
17
16
3
2
1
14
13
12
10
9
11
8
7
6
5
4
remain active. To disable this function,
keep pressed again CALL/
CALL
MENU
EMG
15
24
23
22
21
20
19
18
17
16
3
2
1
14
13
12
10
9
11
8
7
6
5
4
for 5 seconds approx.
MON (Monitor) function / Squelch
The Monitor button is for temporarily excluding (opening) the squelch, in order
to listen to signals that are too weak to keep the squelch permanently opened.
To activate the monitor function, keep pressed for about 2 seconds both ▲▼
at the same time. Follow the same procedure to deactivate the function, or
switch o and on the radio.
When MON is active, you will probably hear a constant background noise.
You can activate the Monitor feature only if the “Emergency” function is disabled.
Scanning all the channels
Midland G9 Plus can automatically search for signals throughout the bands by
scanning the channels in rapid sequence. This function is useful to find out any
active channel.
When a signal is detected, the scanning pauses on that channel for 5 seconds.
Press ▲ for 2 seconds: the scanning will start.
To stop it, push PTT: the Midland G9 Plus will go back to the channel from
which the scanning originally started.
You can activate the scanning feature only if the “Emergency” function is disa-
bled.
“MENU” key
The following features can be selected by using the “MENU” button:
› Channel selection
› CTCSS tone setting
› DCS tone setting
› High/low power selection (only in the PMR446 band)
› VOX
› VibraCALL function
› Call melodies
› Roger Beep
› Keypad Beep

Midland G9 Plus Specifications

General

Brand	Midland
Model	G9 Plus
Category	Two-Way Radio
Language	English