EasyManua.ls Logo

Midland GXT2000 - Transmitting and Receiving a Call; About Range; Operating Your Radio

Midland GXT2000
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model GXT2000/2050 Series
Page 7 www.midlandusa.com
When the battery level is low, the Battery Shell icon and
“Lo bt” will flash in the display indicating your batteries should be
replaced or recharged if using a rechargeable battery pack.
OPERATING YOUR RADIO
POWER ON/OFF AND VOLUME
Rotate the POWER/VOLUME knob clockwise to turn the radio on
and increase the volume level. Rotate the control counter-clockwise
to reduce the volume level and to turn the radio off. During Power
On, the radio will beep 2 times with different tones, the LCD will
display all icons for 1 second and the LCD display will indicate the
last channel selected.
TRANSMITTING AND RECEIVING A CALL
To communicate, all radios in your group must be set to the same
channel and Privacy Code.
1. For maximum clarity, hold the radio 2 to 3 inches from your
mouth.
2. Press and hold the PTT button and speak in a normal voice
into the microphone. The TX icon will appear continuously on
the LCD display while transmitting.
3. To receive a call, release the PTT button. The RX icon will
appear on the display when your radio is receiving a trans-
mission.
ABOUT RANGE
Your GXT Series radios are designed to give you maximum range
under optimum conditions.
Optimum Conditions are:
l Over water
l Open rural areas without obstructions
l Flat areas where you can see the other person

Related product manuals