Midland Micro Mobile MXT105 - ADJUSTING THE DISPLAY ILLUMINATION; USING MONITOR MODE

~I
D
LAN
0
___________
___,;.M;.;..o;...;d.;...;e..-I_M_X_T_10.;..;..5
To
11
/ock"
and
11
Unlock"
the keypad:
1.
Be
sure the radio is turned on (see
Power
On/Off)
2.
Press and
hold
the
Menu::
button for two seconds.
• The
Keypad Lock
On
icon will show on the
~CD
display
when the
keypad is "locked."
3.
Repeat steps 1 and 2 to
"unlock"
the keypad.
•
The
Keypad Lock
On
icon will turn off when the keypad is
"unlocked"
Adjusting the
Display Illumination
You
can adjust the
illumination
of
the LCD display to ensure optimum
visibility
under various daytime and night-time lighting conditions. There
are five
levels
of
illumination,
from off to full
brightness.
To
adjust display brightness:
1.
Be sure the radio is turned on (see
Power On/Off)
2. Briefly press and
release
the
Power On/Off
CD
button.
•
Each time the button is pressed and
released,
the display
illumination
increases to the next brightness level.
• When the maximum brightness
level
is reached and the button is
pressed
aod released,
the
display illumination
turns off.
Using Monitor Mode
Monitor mode
lets
you check for activity on the current active channel.
You
can
also
use Monitor mode to adjust the volume
of
your radio when not
receiving a
signal.
To
enter and exit Monitor mode:
1.
Be sure the radio is turned on (see
Power
On/Off)
2. Be sure you have selected
the desired
channel
(see
Selecting
the
Active Channel)
3.
Briefly press and
release
the
Monitor/Quiet
Channel
•4>)
button to
enter Monitor mode.
•
You
will hear any activity on the current selected
channel.
Page 14
midlandusa.com