~I
DLA
N D
___________
......;.M.;;.;..o;;;..;d;.;..;e;.;..I.;.;.M.;.;;..X;;..;;.T..;.1.;..;;;.05
When a transmission with
the
correct tone is received, the mute is
removed and the voice audio can be heard. When the transmission ends
the channel is muted again. Transmissions that
do
not have the correct
tone are not heard.
The MXT1 05 has 142 Privacy Codes (38 CTCSS codes and 1 04 DCS
codes), which can be applied to
any
channel. If desired, you can select
a different Privacy Code for each channel. See
CTCSS
Privacy
Codes
Frequency
Chart
and
DCS
Privacy
Codes
Chart
for
lists
of
available
Privacy Codes.
IMPORTANT!
To
communicate between two MXT1 05 radios, both radios
must be set to the
same channel (see
Selecting
the
Active
Channel) and
Privacy Code selections.
To
select
a
Privacy
Code:
1.
Press the
Menu
::
button to a place the radio in "Menu" mode.
2. Use the
Channel
Up
..
or
Channel
Down
,.-
button to scroll the menu
options until the LCD display shows
F1
(for CTCSS)
or
F2
(for DCS),
as desired.
3. Press the
Menu
::
button again
to
confirm your selection.
• The
S (for CTCSS)
or
.nr (for
DCS)
icon will
show
on
the
LCD
display, according to your selection.
4. Use the
Channel
Up
..
or
Channel
Down,.-
button to scroll forward
or
backward through the available Privacy Codes until the desired Privacy
Code is shown on the LCD display.
NOTE: DCS Privacy Codes 100-104 are shown on the LCD display
as
AO-A4.
NOTE: Selecting a Privacy Code
of
"oF" will disable the Privacy feature.
5. When the desired Privacy Code is shown on the
LCD
display, press
the
Menu::
button
to
confirm
your
selection.
YOU
MUST
PRESS
THE MENU
::
BUTTON TO CONFIRM
YOUR
SELECTION
OR
THE
PRIVACY CODE
WILL
NOT
BE CHANGED.
NOTE:
If
you select a CTCSS Privacy Code, any pre-selected
DCS
Privacy Code will be cancelled, and vice-versa.
Page 18 midlandusa.com
To Next Page
Loading...
