Midland Micro Mobile MXT105 - SELECTING THE TRANSMIT (TX) POWER LEVEL; RESTORING THE DEFAULT SETTINGS

~
1
o
LAN
o
___________
......;,;,M;..,;.o...;.;d..;.ei_M.;;.;.;X;.;.T
...
1_o...;;.s
Selecting
the
Transmit
(TX)
Power
Level
The MXT1
05 provides two transmit power levels;
HI
and
Lo.
the
Lo
power
level is generally
suitable when operating under optimum conditions (see
About
Range). The HI
power
level
is recommended to ensure you
get
maximum range from your radio.
To
adjust
the
transmit
power
level:
1.
Press
the
Menu
::
button to place the radio
in
"Menu"
mode.
2.
Use the
Channel
Up_.
or
Channel
Down
'Y
to scroll
the menu
options until the LCD display shows F5
3.
press the
Menu
::button
again to confirm your selection.
4. Use the Channel Up
_.
or
Channel Down
'Y
button to toggle the
transmit power setting between HI
and
Lo.
5.
When the desired transmit power level is shown on the LCD display,
press the
Menu::
button to confirm your selection.
YOU MUST PRESS
THE MENU
::
BUTION
TO CONFIRM YOUR SELECTION
OR
THE
POWER
LEVEL
WILL NOT
BE CHANGED.
RESTORING
THE
DEFAULT
SETTINGS
You
can restore the original (factory default) settings for your MXT1
05
at
any time.
To
restore
the
default
settings:
1. Be sure the radio is turned off (see
Power
On/Off).
2.
Press
and hold the
Volume
Up
A button.
3.
Press
and hold the
Power
On/Off
CD
button for two seconds to turn the
radio on.
4. Release both buttons.
•
The radio
will
enter
"standby"
mode at channel
1,
with no Privacy
Code selected.
Page
20
midlandusa.com