EasyManuals Logo

Midland NAUTICO 1 User Manual

Midland NAUTICO 1
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
CHANNEL SELECTION:
Press the MENU button once, and then the
buttons to select one of the
channels. To confirm the selection, press the PTT button or press MENU again
to move to the next feature setting.
TRANSMIT (TX) POWER LEVEL SELECTION
The Nautico1 has 2 transmit power level settings. To select the power level on
channels press the MENU button two times, a “Pr” icon will appear blinking on
the display. Then press the
button to select TRANSMIT POWER LEVEL
icon (Hi / LO). The TX icon will be blank when Hi setting is selected.To confirm,
press the PTT button or press MENU again to move to the next feature setting.
eVOX (Hands-free Transmission)
Your Nautico1 has 2 eVOX level settings: (oF/1/2). To set eVOX, press the
MENU button three times. The display shows “eVOX” blinking while on the right
of the CHANNEL NUMBER display, an “oF” icon appears. Select 1” or 2” by
pressing the
buttons and push the PTT key, or press MENU again to move
to the next feature setting.
eVOX will be more sensitive on the “2” setting than on the “1” setting.
To turn eVOX off, press the MENU button three times. The display shows "VOX"
blinking while on the right of the CHANNEL NUMBER display, an "on" icon
appears. Select "oF" by pressing the
buttons and push the PTT key, or
press MENU to move to the next feature setting.
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to other users
that your transmission has finished. To turn the ROGER BEEP tone on, press
the MENU button until the display shows an "rb" icon while on the right of the
"rb" display, an "oF" icon appears. Select "on" by pressing the
buttons
and push the PTT key, or press MENU to move to the next feature setting.
To turn the ROGER BEEP tone off, press the MENU button until the display
shows an "rb" icon while on the right of the "rb" display, an "on" icon appears.
Select "oF" by pressing the
buttons and push the PTT key, or press MENU
to move to the next feature setting.
10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midland NAUTICO 1 and is the answer not in the manual?

Midland NAUTICO 1 Specifications

General IconGeneral
Maximum range- m
Operating frequency156.025 - 162.550 MHz
Battery typeAA
RechargeableYes
Number of batteries supported4
Call rings quantity3
Weight and Dimensions IconWeight and Dimensions
Weight113 g
Dimensions (WxDxH)251 x 60.3 x 31.7 mm

Related product manuals