14 | XT70 PRO user’s manual
If you set the squelch at the highest level, you will only hear the strongest si-
gnals.
1. In PMR446 band, press the MENU button for three times.
2. The display will show “SL” followed by a number that identifies the squelch
level.
3. Select the desired level by pushing the ▲/▼ controls, then confirm with
PTT (or wait for 4 seconds).
Troubleshooting and radio reset
Your Midland XT70 PRO is designed to provide you with years of optimal per-
formance. If for some reason problems arise, refer to this chapter before con-
tacting a service centre in your region.
Reset
If your transceiver experiences a logical malfunction (improper symbols on the
display, blocking of functions, etc.), it may not be experiencing a true failure,
but rather a problem caused by external factors. For example, it may have an
incorrect setting brought on by a noise or spikes in the electrical system during
battery recharging. In such cases, you can reset the transceiver to its factory-
programmed settings, by resetting all parameters:
1. Turn o the transceiver
2. Keep pressed the ▲ button and turn on the radio at the same time. All
the functions will be reset ex-factory.
Before you go ahead with the reset, we recommend that you take note of all the
setting you have carried out as they will be deleted.
To Next Page
Loading...
