Getting to Know the Camera
1. Move the RECORD switch forward. This turns the camera on.
2. The battery indicator will light from red to green. The Micro SD card indicator will
light green. The record indictor will begin flashing red after 8 seconds. This
indicates the camera is capturing video.
3. To stop recording, move the RECORD switch back to the off position.Note: The
camera will continue recording for 3 seconds after toggling the switch to the off
position.
512 MB to 1 GB available.
Below 512 MB available or
no Micro SD card installed.
Indicates card has been
reformatted.
*Note: Requires Class 4 or higher Micro SD card
*Note: The camera automatically splits the video
into 2 GB segments.
Image Stabilization
The XTC280 uses Digital Image Stabilization (DIS)
to visually stabilize the video from a shaking or
vibrating camera.
Camera Mounting and
Aiming
Mount on Dual Track System
The XTC280 was designed with an innovative
identical dual track mount system on both sides of the
camera. This allows you to mount it on either side of a
helmet with ease. In addition, the interchangeable
mount piece can be moved from the helmet mount to
the goggle mount. This eliminates the hassle of
having to remount the camera every time.
. Open and fold down the back rubber cover.
. Insert Micro SD card into slot observing proper direction (shown below
Return rubber flap into place.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
