• 56 •
Model Number:
CTU-6000 (analyzer); CTU-6000 KIT
Applications:
Tests individual lead-acid cells or monoblocs
(up to 16 volts) in any common confi guration
Voltage:
1.5–20.0 Vdc
Conductance:
100–19,990 siemens
Test Data Storage:
500 string locations of 480 test results stored
internally
Accuracy:
± 2% across test range
Voltmeter Resolution:
5 mV
User Programmable Functions:
•
Preset values for over 250 battery types
•
Low voltage alarm setting
•
Low conductance warning
•
Low conductance failure
•
Test mode (pushbutton/autostart)
Calibration:
Auto-calibration before every test; no future
calibration required
Connectorized Test Cable Options:
•
Dual contact clamps
•
Dual contact probes
•
Custom cables by quotation
Power Requirements:
9.6 V, 1800 mAh, NiMH internal swappable
battery and charger
Specifi cations Celltron ULTRA
Display:
LCD—FSTN
66.52 mm x 33.25 mm (2.62 in x 1.31 in),
128 x 64 pixels, 40-degree viewing angle,
contrast ratio 8, green LED backlight
Keypad:
Stainless-steel dome, polycarbonate overlay,
1,000,000 actuations
Data Transfer:
Infrared protocol, half -duplex IrDA protocol, RS-
232 printer, SD fl ash card
Environmental Operating Range:
0 to +40 ˚C, 95% relative humidity, non-
condensing
Storage Temperature:
–20 to 82 ˚C
Over-Voltage Protection:
•
Auto-reset disconnect
•
Reverse polarity protected
Housing Material:
Acid resistant ABS plastic santoprene overmold
Analyzer Dimensions:
280 mm x 105 mm x 80 mm
(11 in x 4 in x 3 in)
Case Dimensions:
485 mm x 395 mm x 180 mm
19 in x 15.5 in x 7 in
Analyzer Weight:
1.18 kg (2.6 Ib)
CTU-6000 Kit Shipping Weight:
Approximately 5 kg (11 Ib)
Product Specifi cations
To Next Page
Loading...
Need help?
General
