- 18 -
SPECIFICATIONS
Testing Methodology
• Conductance analysis
• High-rate load analysis
• Conductance and load comparison analysis
• Charge acceptance analysis
Product Application:
• Automotive 12-volt cranking batteries
• SAE, Side and L terminal (lead terminal
adapters may be required)
• CCA, SAE, DIN, EN, IEC, JIS,
• Multi-language capability.
Rating Battery Types:
CCA EN
SAE IEC
DIN JIS
Input/Output Interface Options:
IR receiver
DB-9 serial port
Input Power:
115 Vac (nominal), 60 Hz, 15 ampere service,
single phase
Output:
• Current limit: Maximum 60 amperes rectified
DC current
• Voltage limit: Maximum 14.4 volts DC voltage
Physical Dimensions:
Shelf mountable: 9” tall x 14” deep x 15” wide
(230 mm x 355 mm x 385 mm)
Weight: 45 lb (19 kg)
Safety
Thermal sensing element in charging clamp
detects high temperature condition.
Integral power electronics thermal sensing
element and shutdown.
Online conductance charge suspension on
batteries that develop faults during the charge via
online conductance
Reverse polarity
To Next Page
Loading...
