www.midtronics.com
2 – Rescue Charge
xRC-3363
15
Field Description
Initial Pack Voltage The voltage of the pack when the rescue charge was started
Target Pack Voltage Preprogrammed nishing pack voltage based on pack type
Final Pack Voltage The voltage of the pack when the rescue charge was
completed
Amp Hours The total number of Amp Hours accepted by the pack
Charge Duration The amount of time that the rescue charge was operational.
The format is HH:MM:SS
The results are displayed on the xRC screen.
T a r g e t V o lt a g e A c h i e v e d : The rescue charge ran to completion without any errors.
S t o p p e d E a r ly : The rescue charge was stopped by the user before running to completion.
E r ro r D e t e c t e d : There was a fault encountered during the rescue charge. Tap ? for additional
error code details.
Tap Send Results to email or print the Rescue Charge Results.
5. Follow the on-screen directions to disconnect the cables.
To Next Page
Loading...
Need help?
General
