www.midtronics.com
1 – Introduction & Overview
xRC-3363
11
Main Menu
Additional Screens
The dots at the bottom or side of a menu or results screen indicate additional screens are available.
Use your nger to swipe horizontally left, right, up or down across the Controller screen to view all
of the results.
Screen 1
Screen 2
Screen 3
Screen 1
Screen 2
Swipe
Horizontally
Swipe
Vertically
Initial Setup
1. Upon initial power-up, the Language Settings screen is displayed. Tap Next to continue.
System Language Select the Controller default language displayed on the screen.
Test Result Language Select the Controller default language for all displayed tests and
test results.
2. The Create User screen is displayed. Enter a WSLX ID: and tap Next.
IMPORTANT:
B y d e f a u lt, t h e r s t u s e r c r e a t e d i s a s s ig n e d A d m i n is t r a t o r r ig h t s .
T a p A d d U s e r t o a d d a d d i t io n a l u s e r s . S e e C h a p t e r 6 : S e t tin g s t o c h a n g e t h e s e d e f a u lt s .
Select Time Format: 12-hour or 24-hour format
Select Date Format: DD/MM/YYYY, MM/DD/YYYY, or YYYY/MM/DD
Select Time Zone: Time zone oset from Greenwich Mean Time
Set Date: Set the current date
Set Time: Set the current time in the selected time zone
3. The Test Settings are displayed. Tap Next to continue after making any adjustments.
Temperature Units Celsius or Fahrenheit
Decimal Separator 00.00 (dot) or 00,00 (comma)
4. The Congured WiFi Networks screen is displayed. Tap Next to continue after making any
adjustments.
To Next Page
Loading...
Need help?
General
