Midtronics xRC-3363 - Xrc-3363 Location

Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
6
General Safety Guidelines xRC-3363
3.2 This xRC-3363 is for use on a nominal 120 volts or 240 volts circuit.
The 120V grounding plug looks like the plug illustrated in Figure A.
3.3 Use of an extension cord could result in a risk of re and electric shock.
3.4 The plugs and receptacles have dedicated grounding terminals and must be mated with plugs
and receptacles having matching grounding terminals.
4. xRC-3363 Location
IMPORTANT: The xRC-3363 is designed for indoor use only!
It is the responsibility of the operator to provide a controlled environment for the equipment. Work
tents are a common method of protecting equipment in adverse conditions.
The xRC-3363 depends upon the surrounding air for cooling. The free ow of air is important as is the
air temperature. The xRC-3363 must be mounted so that air can freely circulate all around it.
4.1 Do not place combustible materials on or near the xRC-3363 or mount the xRC-3363 closer
than 3 inches from any adjacent wall. The xRC-3363 must never be mounted next to or above
heat generating equipment.
4.2 Locate the xRC-3363 as far away from the battery as the cables permit.
4.3 Never place the xRC-3363 directly above the battery being charged; gases from the battery will
corrode and damage the xRC-3363.
4.4 Only operate the xRC-3363 in a well-ventilated area that is free of dangerous vapors.
4.5 Store the xRC-3363 in safe, dry location.
4.6 Do not operate the xRC-3363 in high relative humidity conditions (85% non-condensing maxi-
mum).
4.7 When using the xRC-3363, follow all regulations for the locality in which the equipment is used.