Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of
return or exchange, failure to return product in similar condition as received could result in limited reimbursement. Please
save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If you
discover any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday,
9 a.m. to 4 p.m. EST) or email customer service at info@midwesthomes4pets.com.
A - Fold and Carry Crate (1) B - Plastic Pan (1) C - Divider Panel (1) D - Plastic Carrying Handle(s)
IMPORTANT INFORMATION
PARTS IDENTIFICATION
Assembly Instructions for Model Numbers
1924DD, 1930DD, 1936DD, 1942DD,
and
1948DD
ASSEMBLY INSTRUCTIONS
1. Remove the folded crate from the carton with the plastic pan
on the bottom and the logo nameplate facing up. Keep the
crate flat on the floor as you begin assembly.
2. To release the hooks that hold the crate in the folded position,
pull up on the safety stop located in the center of the door.
Lift the handle on the door and pull the door out and away
from the crate until the hooks release.
3. While keeping the crate flat on the floor, grab the wires on top
of the side door panel and unfold the crate like you would open
a book.
1
800-428-8560
midwesthomes4pets.com
P.O. Box 1031
Muncie, Indiana 47308
To Next Page
Need help?
General
