Midwest I Crate CA1524DD - User Manual

Assembly Instructions for Model Numbers CA1524DD, CA1530DD, CA1536DD CA1542DD, CA1548DD
Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement.
To prevent possible injury to yourself, remove jewelry such as rings, loose bracelets and necklaces before assembling the crate.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of return or exchange,
failure to return product in similar condition as received could result in limited reimbursement. Please save sales receipt as proof of purchase
for warranty purposes. Check to ensure you have all the parts below. If you discover any parts are missing, immediately call our toll-free
service helpline at 1-800-428-8560 (Monday - Friday 9 a.m. to 4 p.m. EST) or at info@midwesthomes4pets.com.
Parts Identification: Folding Crate, Plastic Pan, Divider Panel, Plastic Carrying Handle(s), 1 or 2 depending on the size of your crate)
ASSEMBLY INSTRUCTIONS
1. Remove the folded crate from the carton. Place it on a flat sur-
face with the plastic pan on the bottom and the wires facing
up. Unhook the locking device located on the side of the crate.
2. While keeping the crate flat on the floor, unfold it like you
would open a book.
3. Lift up on the top wires to form the top and the sides of the
crate.
4. The bottoms of the two side panels should rest inside the bot-
tom panel frame. One edge of the top panel should set inside
the side panel while the other edge should rest outside of the
side panel.
5. Reach in the home and pull the door panel toward you until it
fits into the clips on the ends of each side panel.
Locking Device
800-428-8560
midwesthomes4pets.com
P.O. Box 1031
Muncie, Indiana 47308
1
IMPORTANT INFORMATION
Top panel fits
inside & outside
the side panels
Both side panels fit
inside bottom panel

Summary

Important Information

Assembly Instructions

Step 1: Prepare Crate for Unfolding

Remove folded crate, place on flat surface with plastic pan down, wires up, and unhook locking device.

Step 2: Unfold Crate

Keep crate flat on floor and unfold it like opening a book to form sides and top.

Step 3: Secure Side Panels

Ensure bottoms of side panels rest inside bottom panel frame and top panel edges fit correctly.

Step 4: Attach Door Panel

Pull door panel inward until it fits into clips on ends of each side panel.

Step 5: Secure Top and Door

Pull door outward, push top panel down to secure hooks, adjusting U-Wire as needed.

Step 6: Attach End Panel

Repeat steps 5 for the end panel to secure it to the crate structure.

Step 7: Secure Plastic Pan

Use the pan stop under the front door panel to secure the plastic pan and prevent sliding.

Installing the Optional Divider Panel

Usage and Maintenance

Operating the Door Latch

Lift handle to slide bolt left to disengage, push door firmly and engage bolt to close.

Transport Handles

Plastic handles are for folded position only; attach on same wire as locking device.

Cleaning and Care

Use mild, non-abrasive cleaners and water; avoid coarse scrubbing or abrasive materials.

Plastic Pan Care

Do not expose the plastic pan to direct sunlight for extended periods to prevent warping.

Noise Reduction

Place carpet or carton piece inside crate beneath the pan to help reduce noise.

To Disassemble

Toll-Free Service Helpline

Limited Manufacturers Warranty

Warranty Coverage

Covers defects in workmanship/material for one year; excludes damage from abuse or misuse.

Obtaining Warranty Service

Call helpline to report defects; may require proof of purchase for authorization.

Disclaimers and Limitations

Excludes implied warranties beyond one year; limits liability for incidental/consequential damages.

Midwest I Crate CA1524DD Specifications

General

Brand	Midwest
Model	I Crate CA1524DD
Category	Pet Care Product
Language	English