800-428-8560
midwesthomes4pets.com
P.O. Box 1031
Muncie, Indiana 47308
Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is
assembled. In case of return or exchange, failure to return product in similar condition as received could
result in limited reimbursement. Please save sales receipt as proof of purchase for warranty purposes.
Check to ensure you have all the parts below. If you discover any parts are missing, immediately call our
toll-free service helpline at 1-800-428-8560 (Monday - Friday 9 a.m. to 4 p.m. EST) or email customer
service at info@midwesthomes4pets.com.
Bottom Panel - Has the widest spaces
between the wires, upright bent hooks, and a
pan stop on one end.
Side Panel with Door - Wide panel with hinged
door and three U-shaped slide-bolt locks. Has
loops along both sides.
Side Panel (No Door) - Wide panel with loops
along both sides.
Top Panel - Has a bent tab in the middle of
each short side and open hooks along each
long side with one straight hook in the middle.
Front Door Panel - Narrow panel with hinged
door and three U-shaped slide-bolt locks. The
top of the Door Panel has two bent wire
hooks.
Back Panel - Same size as front door panel.
The top of the panel has two bent wire hooks.
Corner Rods(4) - Straight wire rods with
hooks on the end. They will be inserted
downward through the corner loops to secure
the top, sides, and bottom of your pet home.
Bottom Pan - Slides in and can be easily
removed for cleaning.
IMPORTANT INFORMATION
PARTS IDENTIFICATION
G
F
A
B
C
E
1
Assembly Instructions for Model SL54DD
A
B
C
D
E
F
G
H
H
D
Note: Crate assembly will require two people.
To Next Page
Need help?
General
