Midwest Ferret Nation 182

To Next Page

IMPORTANT INFORMATION

PARTS IDENTIFICATION

Assembly Instructions for Model Number

182

A Door Panel (2) - Large rectangular panel with (2) doors

and latch knobs

B Back Panel (2) -

Large rectangular panel without doors

C Side Panel (4) - Smaller rectangular panel with

protruding locking tabs at the top

D Top Panel Grid - Large rectangular panel with cone

shape connecting pins on all 4 corners

E Bottom Shelf Grid - Large rectangular mesh panel with

wider spacing between the wires

F Bottom Floor Panel Grid - Large rectangular mesh

panel

G Middle Floor Panel Grid - Large rectangular mesh

panel with a cut-out opening in corner

H Bottom Pan - Plastic tray that fits in the bottom of the

cage

I Middle Pan - Plastic tray that fits in the middle of the

cage

J Ramp (3), Clips (4), and Cover (3) - Wire ramp for

access from one level to the other. (Note: There is a slight

bend in the middle. This is intentional.) Clips attach Ramp

to Shelf and reversible Cover slips over the ramp

K Base: Side Supports (2) -

Main structural components

for the base

L Base: Base Supports (4) - Two with multiple holes,

Two without holes

Ramp, with Cover,

Shown in Cage

Ramp Clips

Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of return

or exchange, failure to return product in similar condition as received could result in limited reimbursement. Please save sales

receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If you discover any parts

are missing, immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday 9 a.m. to 4 p.m. EST) or at

info@midwesthomes4pets.com.

To protect the finish of your Pet Home and the bottom pan, use only mild, non-abrasive

cleaners and water. Any course scrubbing or abrasive materials could damage the finish.

00-428-8560

midwesthomes4pets.com

P.O. Box 1031

uncie, Indiana 47308

Holes

No Hol

Main Page

Need help?

Do you have a question about the Midwest Ferret Nation 182 and is the answer not in the manual?

Summary

Parts Identification

Key Base Components

Identifies base structure parts like Side Supports and Base Supports.

Cage Panels and Grids

Lists various panels and grids for cage construction.

Hardware and Accessories

Details components like casters, shelves, ramps, clips, bolts, and screws.

Assembly Instructions

Base and Lower Structure Assembly

Steps 1-3 for base frame, supports, and bottom shelf grid.

Attaching Casters and First Panels

Steps 4-6 for casters, door panel, and bottom floor grid.

Installing Back and Side Panels

Steps 7-8 for attaching back and side panels.

Completing Cage Walls and Top

Steps 9-14 for second door, middle grid, top panel, and locks.

Final Assembly: Pans, Shelves, and Ramps

Steps 15-21 for pans, shelves, ramps, and clips.

Cage Features

Convenience and Cleaning Features

Highlights removable shelves, door latches, and easy cleaning aspects.

Functional and Design Features

Describes accessory hangers, full levels, locking casters, and removable doors.

Limited Manufacturers Warranty

Warranty Coverage and Terms

Details the one-year warranty for defects in workmanship and material.

Warranty Exclusions and Service

Explains what is not covered and how to obtain warranty service.