Miele B 2847 - Assembling; Initial Setup Procedure

^
Movethesteamironingsystemtoa
desiredlocation.
^ Pullthereleasehandleupwards
whileholdingthehandleontheback
ofthetowertokeepitsteady.
Thelockingmechanismofthetowerwill
bereleasedand,atthesametime,the
X-framewillunfold.
^
Holdthereleasehandlepulledout
andguidetheironingboarduntilit
clicksintoplaceatapositionof
approx.45°.
Theboardwillholdindependentlyin
thisposition.
^
Pullthebackoftheironingboard
upwardswithbothhandsuntilit
clicksintoplaceatthehorizontal
position.
^
Ensuretheironingboardisengaged
onbothsidesofthetower.
Otherwisetheheightoftheironing
boardwillnotbeabletobeadjusted.
Assembling
15