Miele B 2847 - Switching on; System Power-Up; Filling the Water Container

Switchingonthesteamironing
system
^
PresstheOn/Offbutton s.
Thecirclearoundthe s buttonwilllight
upyellow.
Thesystemwillstarttoheatup.Some
steammayescapefromtheironduring
theheating-upphase.
Pumping,boilingandknockingnoises
maybeheardduringtheheating-up
phase.
Thesearenormalnoisesthatoccur
duringoperation.
Theindicatorlight * illuminateswhen
thesteamironingsystemandthesteam
functionarereadytouse.
Dependingonthenumberofoperating
hoursthesteamironingsystemhas
beenused,itmaycarryoutautomatic
rinsing(see'Automaticrinsing')orauto
-
maticdescaling(see'Automatic
descaling').
Aslongastherinsingordescaling
processisrunning,thesteam
ironingsystemcannotbeusedfor
ironing.
Fillingthewatercontainer
Theindicatorlight k illuminatesifthe
watercontainerisemptyornotfittedin
thesteamironingsystem.
^ Removethewatercontainer.
Holdthewatercontainerbythe
integratedhandle,thenpulloutatthe
topandliftouttoremove.
Whenremovingthewatercontainer,
somedropsofwatermaycomeout
beforethecontainer'svalveshave
completelyclosed.Thiscanbeavoided
bytakingoutthewatercontainer
slowly.
Switchingon
24