Miele B 2847 - Completing the Rinsing Process

Ensurethatthemetalcontactsatthetopoftheresidual
waterdrawerarecleananddry.Itisviathesecontacts
thattheapplianceisinformedwhentheresidualwater
drawerisfullorfittedintheappliance.Ifthecontactsare
wetordirty,thisinformationisnottransmitted.
Completingtherinsingprocess
^
Waitforapprox.20secondsbeforerefittingthedrawerin
theappliance.
Theindicatorlight 2 goesout.
Afterheatingup,thesteamironingsystemisreadytouse
again.
Thesteamfunctioncannotbeuseduntiltheresidualwater
drawerisrefitted.
Whentheindicatorlight * illuminates,thesteamironing
systemisreadytouseagain.
Cleaningandcare
44