Miele B 2847 - Dismantling Difficulties; Ironing Board Locking Issues

Problem Possiblecause Remedy
Thesteamironing
systemcannotbe
dismantled.
Theironingboardis
notinitslowest
workingposition.
Adjusttheironingboardtoits
lowestworkingposition(see
'Dismantling').
Theresidualwater
drawerisnot
completelypushed
inandclickedinto
place.
Pushtheresidualwater
containerallthewayinthetower
untilitclicksintoplace.
Thenadjusttheironingboardto
itslowestworkingposition(see
'Dismantling').
Theironingboard
cannotbeclickedinto
placeintheend
positionwhen
assemblingand
dismantling.
Theironingboard
hasdisengaged
althoughthetower
wasnotinthe
lowestposition.
Pressandholdintherelease
buttononthetower.
Simultaneouslyturntheheight
adjustmentdialalltheway
towards q anddonotletgo.
Pushthetowerdowntoits
lowestworkingpositionandthen
thereleasedial,followedbythe
releasebutton.
Theironingboardcannowbe
eitherdismantledorplacedina
workingposition.
Iftheironingboardcontinuesnot
tolockintoplace,callMiele.
Problemsolvingguide
60