Miele CM 7500 - Milk Flask

Making coffee with milk
36
Milk flask
The stainless steel flask keeps milk cool
for longer. Good milk froth can only be
made with cold milk (<10°C).
 Connect the stainless steel suction
tube to the inside of the lid. Make
sure that the slanted end is pointing
downwards as shown.
 Fill the milk flask up to max.2cm
below the rim. Seal the milk flask with
the lid.
 Connect the stainless steel angled
end of the milk tube to the top of the
lid until it clicks into place.
 Place a container with sufficient milk
beside the coffee machine. Connect
the other end of the milk tube to the
central spout.
If the central spout is in the uppermost
position, it will be difficult to connect
the milk pipework.
To bring the central spout into the
maintenance position:
 Touch for three seconds.
 TouchOK to leave the maintenance
position.