Cleaning and care
66
Central spout with
cappuccinatore
With the exception of the stainless steel
cover, all parts of the central spout
should be cleaned in the dishwasher at
least once a week. This will remove
coffee and milk deposits effectively.
Clean the stainless steel central spout
cover by hand only using warm water
and a little washing-up liquid, applied
with a soft cloth.
The Drinks menu is visible in the display.
If the central spout is in the uppermost
position, it cannot be dismantled. The
central spout must be moved into the
maintenance position to do this.
Touch for 3 seconds.
The central spout will move into the
maintenance position.
Pull the stainless steel cover forwards
and off.
Pull the dispensing unit off towards
you.
Twist the upper section with the
holder for the milk pipework and pull
it off. Then pull the Y-shaped piece
off. Remove the dispensing
spouts.
Clean all parts thoroughly.
To Next Page
Loading...
