Cleaning and care
67
Clean the surfaces of the central
spout with a damp cloth.
If necessary, clean the milk pipework
under running water with the brush
supplied:
Insert the brush in the tube and move
it back and forth as far as it will go
until all milk residue has been
removed.
Refit the components of the central
spout:
Reassemble the dispensing unit.
Push the spout nozzles firmly back
onto the dispensing unit.
Make sure that all parts are tightly
connected to one another.
Push the dispensing unit back into
the central spout and refit the
stainless steel cover.
Touch OK.
Useful tip: If the coffee machine is
switched off, the central spout
components can be removed and
cleaned at any time.
To Next Page
Loading...
