EasyManua.ls Logo

Miele CM 7500 - Unusual Performance of the Coffee Machine

Miele CM 7500
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Problem solving guide
89
Unusual performance of the coffee machine
Problem Possible cause and remedy
The lighting remains off
after the coffee
machine is switched on.
The lighting has been switched off.
Switch the lighting on (see "Settings - Lighting").
The lamp needs to be replaced.
Call Miele.
The display remains
dark when the coffee
machine is switched on
using the On/Off
sensor.
The On/Off sensor was not touched for long
enough.
Touch the On/Off sensor for at least 3seconds.
The master switch is pointing to "0".
Set the master switch to the "I" position.
The plug is not correctly inserted into the socket.
Insert the plug into the socket correctly.
The mains fuse has tripped because the coffee
machine, mains voltage or another appliance is
defective.
Switch off at the wall socket and remove the plug.
Contact a qualified electrician or Miele.
The coffee machine
switches off suddenly.
The switch-off time programmed using the timer has
been reached.
If required, you can select a new switch-off time.
The plug is not correctly inserted into the socket.
Insert the plug into the socket correctly.
The coffee machine is
switched on. The
lighting switches off
suddenly.
This is not a fault. The lighting switches off
automatically if the coffee machine is not used for
some time. The automatic switch-off time cannot be
changed.
The sensors do not
react to touch.
The appliance cannot
be operated.
There is a fault inside the appliance.
Set the master switch to the "0" position.
Disconnect the electricity supply by switching off
at the wall socket and withdrawing the plug, or
switching off the mains circuit breaker.

Table of Contents

Related product manuals