Miele CM6310 - Profile Selection and Modification

User profiles
41
Selecting a user profile
This selection is only possible if a
profile has been allocated in addition
to the Miele standard user profile.
 Use the arrow buttons  to select
Select profile and tap OK.
 Select the profile with the arrow
buttons and tap OK.
The name of the current user profile is
shown at the top left of the display.
Changing the name
This selection is only possible if a
profile has been allocated in addition
to the Miele standard user profile.
 Use the arrow buttons  to select
Change name and tap OK.
 Proceed the same as with "Create
profile":
– Select  to delete a character.
– To enter new characters, highlight the
relevant character and confirm with
OK,
– Save the new name by selecting  in
the display and tapping OK.
Deleting a user profile
This selection is only possible if a
profile has been allocated in addition
to the Miele standard user profile.
 Use the arrow buttons  to select
Delete profile and tap OK.
 Select the profile you wish to delete.
 TapOK.
A check will appear after the name
and the user profile will be deleted after
a short time.
Changing a user profile
You can program the coffee system so
that it changes back to the Miele
standard profile automatically after each
drink is dispensed, so that the Miele
profile is always active when the
appliance is switched on or so that it
retains the most recently selected
profile.
 Select Change profile and tap OK.
You now have the following options:
– Manually: The selected user profile
remains active until you select
another user profile.
– After each use: The appliance will
change back to the Miele standard
user profile automatically after a drink
is dispensed.
– When turned on: Each time the
appliance is switched on it will
automatically select the Miele
standard user profile regardless of
which user profile was set before the
appliance was last switched off.
 Select the required option and tap
OK.