Miele CM6310 - Water Hardness and Factory Reset

Settings
48
Water hardness
See "Before using for the first time" for
information about water hardness.
Display brightness
Change the display brightness using
the arrow keys .
Volume
(CM 6310)
The volume of the alarm and the sensor
buttons can be set using the arrow
buttons.
Tip: To switch off the tones, touch the
arrow buttons until no more
segments are filled in and Turned off
appears.
Cup heating
(CM 6310)
See "Cup heating" for more
information.
Factory default setting
You can reset the settings back to the
ones which were set when the coffee
system was delivered - the factory
default settings.
The number of drinks and the appliance
status (No. of drinks until ...) cannot be
reset.
Please refer to the "Setting options"
chart for the factory settings that are
shown in bold.
The following settings will not be
reset:
– Language
– Time of day