Frequently Asked Questions
68
Message Possible cause and solution
F73 or
Check the brew unit
The brew unit cannot be positioned correctly.
Turn the appliance off with the On / Off button.
Remove and clean the brew unit (see "Removing
the brew unit and cleaning it by hand").
Push the coffee ejector of the brew unit into the
correct position (see diagram).
Do not insert the brew unit. Close the appliance
door and turn the appliance on with the On/Off
button .
This will initialize the brew unit motor and put in back
into the start position.
When Insert the brew unit appears in the display,
open the appliance door and put the brew unit
back in the appliance. Then close the door.
To Next Page
Loading...
