,
Installation work and repairs to
electrical appliances must only be
carried out by a suitably qualified
and competent person in strict
accordance with current local and
national safety regulations. Repairs
and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable
for unauthorised work.
What to do if...
... after switching on, the appliance
does not heat up
Check whether the mains fuse has
tripped. If it has, contact a qualified
electrician or Miele.
... the heating switches on and off at
the highest setting on one of the
cooking zones
The overheating protection mechanism
has been triggered (see "Overheating
protection").
... it is taking too long for the
contents of the pan to come to the
boil
– Check that the mark on the control is
exactly positioned at the "12". The
appliance operates at a lower power
level when the control is positioned
between the "12" and the "0".
–
You can test the power level of the
cooking zone (see "To test the power
level").
Problem solving guide
29
To Next Page
Loading...
Need help?
General
